BCLZS - INTERTUF SILVER, EXEMPT, JAA021E

  • MSDS: BCLZS
  • Manufacturer: INTERNATIONAL PAINT CO INC
  • Product Name: INTERTUF SILVER, EXEMPT, JAA021E
  • National Stock Number: 8010-00N006126
Product Identification

Product ID:INTERTUF SILVER, EXEMPT, JAA021E
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006126
MSDS Number: BCLZS

Responsible Party
INTERNATIONAL PAINT CO., INC.
220 S LINDEN AVE
SOUTH SAN FRANCISCO, CA 94080-6411
US

Cage: 1M431

Contractor
INTERNATIONAL PAINT CO INC
SOUTH SAN FRANCISCO, CA 94080-6411 US

Cage: 1M431

Ingredients

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 48.6%

OSHA PEL 100 PPM


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 4.0%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


LEAD RESINATE

Fraction By Weight: 7.0%


LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Effects of Overexposure:INH:IRRIT RESP TRACT,HDCH,DIZZ.PRLNGD EXCESS
ABSORB OF INORG PB BY ING OR INH:(SEE SUPP DATA)

First Aid

First Aid:INH:MOVE TO FRESH AIR AWAY FROM EXPOS. EYES:FLUSH WATER 15
MINS. CALL MD. SKIN:WASH AFFECTED AREA W/WATER. REMOVE CONTAMINATED
CLTHNG. WASH BEFORE REUSE. CALL MD IF SYMPTOMS OF ILLNESS. ABNORMAL
INGES T:CALL MD AT ONCE.

Fire Fighting

Flash Point:81F,27C CC
Lower Limits:0.77
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL TO SMOTHER THE FLAMES.
Fire Fighting Procedures:USE WATER TO COOL UNOPENED CNTNRS IN VICINITY.
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENTS. DO NOT USE
IN AREAS WHERE SPARKS OR OPEN FLAMES ARE PRESENT.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
PROLONGED INHAL OF VAPORS. BENTILATE AREA. CLEAN UP W/ABSORBENT
MATL.

Handling

Handling and Storage Precautions:STORE IN BLDGS DESIGNED & PROTECTED
FOR STORGE OF NFPA CLASS 1C FLAM LIQ. PB POISON IS
CUMULATIVE.PREVENT INHAL OF PB FUMES OR DUST.WT PER GAL:8.25LBS
Other Precautions:IF MATL SUBJ TO EXCESS HEAT AS THAT PRODUCED BY
WELDING OR FLAME CUTTING, LEAD FUMES WILL BE EMITTED:TAKE PREC TO
AVOID INHAL OF VAPORS.VAP PRESS:2.0 FOR MINERAL SPIRITS TO 9.5 FOR
XYLENE

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPRVD FOR EXPOS OF CONCERN.
Ventilation:GEN DILUT/LOC EXHST ADEQUATE TO KEEP LEVELS BELOW TLV &
LEL.
Protective Gloves:REQD:LONG EXPOS
Eye Protection:SFTY GLASS W/SPLASH GUARD
Other Protective Equipment:AS NEEDED TO PRVNT PROLONGED SKIN CNTCT
W/CONTAM CLTHNG.
Supplemental Safety and Health
ALSO KNOWN AS PRIMOCON SILVER,EXEMPT,E1744.OVEREXPOS:CHARACTER BY ABDOM
PAIN(PB COLIC), METAL TASTE, WT LOSS MUSCLE PAIN & WEAK.VERIFY PB
ABSORB BY MD EXAM & BIOLOGICAL SPECIMEN ANALYSIS.

Chemical Properties

Boiling Pt:B.P. Text:281-400F
Vapor Density:>1.0
Evaporation Rate & Reference:<1.0, ETHER
Appearance and Odor:COMBUSTIBLE LIQUID
Percent Volatiles by Volume:66.3

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO*2, OXIDES OF LEAD

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL,STATE 6 FEDERAL
REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.